Can I rip Parallam® PLUS PSL?

No, Parallam® Plus PSL must maintain its original cross section and shall not be re-sawn in depth or thickness. Parallam® Plus PSL may be cut to length. More information of Parallam® Plus PSL can be found in the Specifier's Guide TJ-7102. For information on re-sawing untreated Trus Joist structural composite lumber products, see Technical Bulletin #305.

Achieving Drainage Slope with Parallam® Plus PSL - tb 603 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request